Creating a mosaic tabletop with broken tiles is a creative and enjoyable project. Here’s a step-by-step guide to help you get started: Materials Needed: Broken tiles (ceramic, porcelain, or glass) Tile adhesive or thin-set mortar Grout Sealer (optional, for porous tiles) Tile cutter or nippers (for shaping tiles) Plywood or a table with a flat top (to use as the base) Notched trowel or putty knife Sponge Safety gear (gloves, safety goggles) Marker or chalk Ruler or measuring tape Buckets and mixing tools (for grout and adhesive) Soft cloth Steps: Prepare the Surface: Ensure the table or plywood surface is clean and smooth. If using plywood, you may want to prime or seal it to prevent moisture damage. Plan Your Design: Lay out your broken tiles on the surface to create your desired design. You can sketch your design directly on the surface using a marker or chalk. Experiment with different tile arrangements until you find a pattern you like. Cut and Shape Tiles: Use a tile cutter or nippers to trim and shape tiles to fit your design. Wear safety goggles and gloves to protect yourself from sharp edges. Apply Adhesive: Spread a thin layer of tile adhesive or thin-set mortar onto the surface using a notched trowel or putty knife. Work in small sections to prevent the adhesive from drying out before you can place the tiles. Place the Tiles: Press each tile piece firmly into the adhesive, following your design. Leave small gaps between tiles for the grout. Let the Adhesive Set: Allow the adhesive to dry according to the manufacturer's instructions, usually 24 hours. Apply Grout: Mix the grout according to the package instructions. Spread the grout over the tiles using a grout float, pressing it into the gaps between the tiles. Wipe away excess grout with a damp sponge, being careful not to remove grout from the gaps. Clean and Polish: Once the grout has set (usually about 15-30 minutes), clean the tile surfaces with a damp sponge to remove any grout haze. After the grout is fully cured (usually 24-48 hours), polish the tiles with a soft cloth. Seal the Grout (Optional): Apply a grout sealer to protect the grout from stains and moisture, especially if the table will be used outdoors or in a humid environment. Finish and Enjoy: Allow everything to dry completely. Place your new mosaic tabletop in your desired location and enjoy your handiwork! Tips: Design Flexibility: Don’t worry about being too precise. The charm of mosaic work lies in its irregularity and uniqueness. Safety: Always use safety gear when cutting tiles to prevent injuries. Maintenance: Regularly clean your mosaic table to keep it looking fresh. Avoid harsh chemicals that can damage the grout or tiles. This project can be a wonderful way to recycle broken tiles and create a unique, personalized piece of furniture. Check more at: https://thanhcongcraft.com/how-to-make-a-mosaic-table-top-with-broken-tiles/