Creating a stained glass stepping stone is a beautiful and rewarding project. Here’s a step-by-step guide to help you through the process: Materials Needed: Stained glass pieces Concrete mix Plastic stepping stone mold Release agent (like petroleum jelly) Wire mesh or fiberglass mesh Contact paper Glass cutter Safety gloves and goggles Water Mixing container and stirring tool Sponge Newspaper or old towels Instructions: 1. Design Your Pattern: Sketch your design on paper, ensuring it fits the dimensions of your mold. Transfer the design to the sticky side of the contact paper. 2. Cut the Glass: Use a glass cutter to carefully cut the stained glass pieces to match your design. Wear safety gloves and goggles to protect yourself from glass shards. 3. Prepare the Mold: Coat the inside of your mold with a release agent to prevent the concrete from sticking. Place your contact paper design in the bottom of the mold, sticky side up. 4. Arrange the Glass: Press the cut glass pieces onto the contact paper, ensuring they adhere and form your design. 5. Add Mesh: Place wire or fiberglass mesh over the glass pieces. This will help reinforce the stepping stone. 6. Mix the Concrete: In a mixing container, combine the concrete mix with water according to the package instructions. Stir until the mixture is smooth and the consistency of thick mud. 7. Pour the Concrete: Slowly pour the concrete over the glass and mesh, filling the mold. Tap the sides of the mold gently to remove any air bubbles and ensure the concrete settles evenly. 8. Let it Set: Allow the concrete to cure for at least 24-48 hours, or as recommended by the concrete mix instructions. 9. Remove the Stone: Once the concrete is fully cured, gently remove the stepping stone from the mold. Peel off the contact paper from the glass pieces. 10. Clean the Glass: Use a damp sponge to clean off any concrete residue from the glass pieces. Tips: Work in a well-ventilated area and follow safety guidelines when handling glass and concrete. Be creative with your designs, experimenting with different colors and shapes of stained glass. Make sure the stepping stone is completely dry before placing it outside to avoid cracking. Enjoy your beautiful, handmade stained glass stepping stone! Source: https://thanhcongcraft.com/how-to-make-a-stained-glass-mosaic-stepping-stone/